SapuraKencana 1200

This vessel's operational profile is primarily focused on pipelay. She features a centre double joint firing line to optimize pipelaying operations unhampered by vertical roll motions. Firing line and double joint fabrication areas on tween deck to keep equipment clean and dry and to keep an unobstructed main deck.

Built by

COSCO Nantong

Year

2014

Owned by

SapuraKencana

Designed by

Ulstein Design & Solutions BV

Principal dimensions

Length:
153.6 m
Beam:
35 m
Draught (max):
7.3 m
Speed (max):
13.2 kn
Accommodation:
300 POB

Note: Subject to selected variant configuration

Capacities

Crane, fixed over stern at 40 m:
1,200 t
Crane, at 30 m outreach:
1,000 t
Pipelay system:
Single joint below main deck
Positioning system:
DP3
Positioning system, shallow waters:
10-point mooring system

Classifications

  • +A1 Offshore Support Vessel (pipelay, heavy-lift, SPS)
  • +AMS
  • DP3
  • BWE
  • CPS
  • ENVIRO
  • GP
  • HELIDK
  • HAB+
  • UWILD
The stinger handling system on the SapuraKencana 1200.
The stinger handling system on the SapuraKencana 1200.

Ship history

The vessel is designed as self-propelled pipelay heavy lift vessel featuring 10-point mooring systems for operations in water depths up to 150 m, while for deep water operations it utilises its DP3 system. The operational profile of the SapuraKencana 1200 is primarily focused on pipelay.

The Stinger Handling System uses an A-frame, and was developed in parallel with the ship design. This integrated approach resulted in a very compact system, optimally integrated in the aft ship, with due consideration given to stinger section handling, maintenance and accessibility during operations. In addition to stinger handling, the A-frame can also be used for Deepwater Lowering purposes, using the wire of the Abandon & Recovery (A&R) system.

The design contract for the vessel was signed in December 2010, the design aiming for maximum efficiency and cost effectiveness. As such, the vessel features a centre single joint firing line to optimise pipe laying operations that are not hampered by vertical motions due to roll. Firing line and the single joint fabrication area is on a tween deck completely covered by the main deck, providing a clean and dry environment for the pipelay equipment and an unobstructed main deck for lifting operations. 

Please contact us for more information

Ulstein Design & Solutions B.V.

Cornerstone Building (6th floor)
Rotterdam Airportplein 32
3045 AP Rotterdam
The Netherlands

Tel: +31 10 475 00 11

udsbv.info@ulstein.com