Launch-Go-Michigan-P1200088

​First launch for Otto

‘Go Michigan’, the first of four platform supply vessels for Otto Offshore, was launched on 10 December 2015 at Wuchang Shipbuilding Industry Co., Ltd, China. The vessel is based on the PX121 design from Ulstein.
Published
11 December 2015
Share

'Go Michigan' in reference list

A vessel of the PX121 design has an overall length of 83.4 metres, a beam of 18 metres and a load capacity of approx. 4,000 tonnes. The vessels are equipped with the most modern solutions for DP2 (dynamic positioning), oil recovery and fire-fighting. The ships are recognised as medium-sized PSVs and have a cargo deck of approximately 850 square metres. They can accommodate 30 persons and keep a speed of approx. 14.5 knots.

The PX121 vessels boast a performance normally expected from a larger PSV. Being able to do this at a medium-sized PSV cost, with reduced emissions and fuel consumption, the ship owner gets a favourable combination of two market areas.

These PX121 vessels for Otto Offshore are capable of supporting offshore activities which are being carried out further from shore and in deeper waters. The vessels can carry flexible loads. In addition to tanks for various contents such as oil, water, and drilling fluids, they have four stainless steel tanks for flammable liquids or corrosive chemicals (LFL tanks). The vessels are certified by DNV and carry the 'Clean Design' notation.

The vessels are of the X-BOW® hull line design, which is efficient on all draughts, a factor critical for PSVs, as they frequently operate with varying draughts. The X-BOW® has unique and documented qualities in head seas, in which the bow shape eliminates slamming and reduces bow impact, noise and vibration. This leads to better performance and increased operability, increased crew comfort and safety and reduced fuel consumption. Each ship will be equipped with dynamic positioning system Class II and meets the requirements of Comfort Class.

Otto Offshore is a Singapore based shipowner, and is a company in Otto Marine Ltd.

The contract with Ulstein includes the deliveries of design, engineering and main equipment. An extensive delivery from Ulstein Power & Control includes integrated control systems, bridge (radio, navigation), switchboard, diesel electric propulsion and frequency converters, and communication systems.

The vessels will be prepared for offshore crane and mezzanine deck for ROV.


Latest news

SX225 Ulstein Dec23 Cable Lay Ops SB Fore 2880px
Feature

Solving the cable laying challenge

In the vast expanse of offshore wind energy, cable-laying vessels are essential—the silent architects of our renewable future. As wind farms grow larger and more ambitious, the demand for efficient cable installations has intensified. Enter the ULSTEIN SX225, a vessel designed to tackle the challenges head-on.

Windea Leibniz Matthias Giebichenstein cmyk Per Eide
Feature

Dedication to offshore wind

Offshore wind energy generation is one means to reach international climate goals. Ulstein has developed offshore wind designs since 2006. The designs draw on our broad experience in oil and gas, and range from new turbine installation concepts to foundation installation vessels and service operation vessels.